International standard of Glasses and sunglasses frame test

  1. The normal standard of glasses test.

–optical glasses test standard

a. ISO 12870

b. ANSI Z80.5

–Sunglasses test standard

a. EN 1836; EN167; EN 166

b. ANSI Z80.3

c. AS 1067

d. QB 2457

–Safety glasses and sunglasses test standard

a. ANSI Z87.1

–Lenses test standard

a.ISO8980-1-5

b.GB 10810.1

c. GB 10810.2

d. GB 10810.3

2. European Committee of standardization

CE=European conformity

CE marking – not a trademark

CE marking

  • A mandatory European product marking and certification system.
  • A kind of trade passport for the European marketplace.
  • Must be affixed in 18 countries of the European Economic Area (EEA).
  • Must be affixed by visibility, legibility, and indelibly.
  • Height: at least 5 mm.
  1. ISO 12870:2004 (Optical glasses)
  • Dimensional Tolerances (DM): Structure aspect with destructive test
  • Bridge Deformation (BD)- Structure aspect with non-destructive test
  • Dimensional Stability (DS)-Material aspect with destructive test
  • Hinge Endurance (HE)- Structure aspect with destructive test
  • Resistance to Ignition (IT)- -Material aspect with destructive test
  • Resistance to Perspiration (RP)-Surface treatment with destructive test
  • Nickel Release (NR)_EN12472 & EN1811- Surface treatment and material aspect with destructive test
  • Resistance to Optical Radiation (RR)- Surface treatment with destructive test
  1. EN 1836:2005 (Sunglasses)
  • Filter requirements

– Transmittance (TP) – Non-destructive test

– Optical power of oculars (OP) – Non-destructive test

– Scattered light (SL) – Non-destructive test

– Material & surface quality (SQ) – Non-destructive test

– Minimum Robustness (MR) -destructive test

– Resistance to radiation (RR) -destructive test

– Ignition (IT) -destructive test

  • Requirements for complete sunglasses (frames with filters)

– Transmittance (TP) – Non-destructive test

– Optical power of oculars (OP) – Non-destructive test

– Scattered light (SL) – Non-destructive test

– Material & surface quality (SQ) – Non-destructive test

– Minimum Robustness (MR) -destructive test

– Resistance to radiation (RR) -destructive test

– Ignition (IT) -destructive test

– Minimum Robustness (MR/BD) -destructive test

– Nickel release (NR) – destructive test

  1. ANSI Z87.1-2003 (Safety glasses)
  • High Mass Impact (HM) – destructive test
  • High-Velocity Impact (HV) – destructive test
  • Drop Ball Impact (BT) – destructive test
  • Minimum Thickness (MT) – destructive test
  • Plastic Lens Penetration Test (PP) – destructive test
  • Optical Requirements (OP) – Non-destructive test
  • Haze (HT) – Non-destructive test
  • Transmittance (TP) – Non-destructive test
  • Flammability (BR) – destructive test
  • Corrosion Resistance (CR) – destructive test
  • Cleanability (MS) – destructive test

For Wal-Mart test

  • Hinge Durability
  • Thermal Stability Test
  • Ignition Test
  • Burn Rate Test
  • Child Safety_ASTM F963
  • Nose Pad Arm Bending Test
  • Metal Frames

-Strength Tests

-Bridge Solder Point Flex Test

  • Plating Integrity
  • Corrosion Resistance